Samsung S6 Phone Edge: Install Android 7.0 Nougat Now

The latest update from Samsung has brought Android 7.0 Nougat to both the Galaxy S6 and S6 Edge, injecting renewed vitality into these devices. Android 7.0 Nougat introduces a multitude of fresh features to enhance the user experience on these smartphones. For avid Android enthusiasts who prefer rooted devices, the transition to official stock Android 7.0 Nougat firmware comes with the downside of losing root access. Re-rooting your device becomes necessary following the update. Rooting the Samsung S6 Phone or S6 Edge on Android Nougat poses greater challenges than before, as the process has been intentionally made more complex.

Google has dramatically enhanced Android device security in recent years, implementing new features that present formidable challenges for developers and hackers seeking to exploit vulnerabilities and gain root access to phones. The evolving security measures have significantly prolonged the time required for developers and tweakers to devise effective rooting methods. Rooting the S6 and S6 Edge using TWRP recovery and SuperSU had previously been a challenging task until Dr. Ketan introduced a modified version of SuperSU tailored to work seamlessly with both devices.

Now, you can effortlessly install the latest TWRP 3.1 custom recovery on your phone, enabling a smooth rooting process with the addition of the SuperSU file. Before initiating the installation procedures, meticulously review the preparatory steps. Familiarize yourself with the instructions and then proceed with installing TWRP recovery and rooting your Galaxy S6/Galaxy S6 Edge running Android 7.0 Nougat firmware.

Preparatory Steps

This guide is exclusively intended for Galaxy S6 and Galaxy S6 Edge devices running Android 7.0 Nougat. Do not attempt this procedure on any other device.
Follow the steps to install Official Android 7.0 Nougat on your Galaxy S6.
Download and install the Official Stock Android 7.0 Nougat firmware for the Galaxy S6 Edge.
Ensure your device is charged to a minimum of 50% before proceeding.
Utilize the original data cable to establish a stable connection between your PC and phone.
As a precaution, back up your important data using the linked backup guides:
- Backup SMS Messages
- Backup Call Logs
- Backup Contacts
- Backup EFS – Manually copy your files to your PC or laptop.

Adhere closely to this guide’s instructions to prevent any errors or issues.

DISCLAIMER: Rooting the device and flashing a custom recovery may void its warranty. Techbeasts and Samsung cannot be held responsible for any mishaps that may occur. Proceed at your own risk, ensuring that you understand and accept all associated risks.

Essential Downloads:

Obtain and install Samsung USB drivers.
Download and extract Odin 3.12.3.
Version: Android 7. Nougat
PDA: G925FXXU5EQBG
MODEM: G925FVFG5EQBG
Download Android 7 Nougat for G925F device | Download Android 7 Nougat for different variants of the Galaxy S6 Edge
Unpack the firmware file that was downloaded to obtain the .tar.md5 files.

Samsung S6 Phone Edge: Install Android 7.0 Nougat Now

Launch Odin3 V3.12.3.exe on your PC after extraction.
Activate OEM Unlock on your Galaxy S6 Edge or S6 by heading to Settings > About Device > Tap the build number 7 times to unlock developer options. Re-enter settings, access developer options, and toggle on “OEM unlock.”
Enter download mode on your S6/S6 Edge by powering it off completely and then holding the Volume Down + Home + Power keys while turning it on. Press Volume Up upon boot-up.
Connect your phone to your PC; the ID: COM box in Odin3 should turn blue upon successful connection.
Select the “AP” tab in Odin, then choose the downloaded TWRP recovery.img.tar file.
Ensure that only “F. Reset Time” is ticked in Odin3 before initiating the flash by clicking the Start button.
Wait for the green light above the ID: COM box to indicate completion, then disconnect your device.
Boot into TWRP recovery without restarting your device by pressing the Volume Down + Home + Power keys simultaneously, then switching from Volume Down to Volume Up while keeping the Power + Home keys pressed.
In TWRP Recovery, allow modifications, go to “Install,” locate the SuperSU.zip file, and select and confirm Flash.
After flashing SuperSU.zip, reboot your device into the system.
Check for SuperSU in the app drawer upon booting up, and install BusyBox from the Play Store.
Verify root access with Root Checker to confirm completion of the process.